Your IP: 3.95.233.107 | Your location: United States United States

Linksys Cisco router - L2TP


Please note: Linksys routers support only L2TP (without IPSec). L2TP alone does not encrypt your traffic, it only reroutes you through one of our servers.


This guide explains how to connect your Linksys Cisco router to WTVA VPN using the L2TP protocol.


First: Make sure your Linksys router is configured properly and your can access the Internet from a computer connected to one of the LAN ports of the router or WiFi.

We need to make few changes to the router configuration, these changes are made in the web configuration panel of your router. You can access it by visiting the local IP of your router from your web browser. The two most common, default local IPs that most routers have are 192.168.1.1 or 192.168.0.1 – you can access these by opening http://192.168.1.1 or http://192.168.0.1 in your browser. The default IP, username and password are listed in your router’s User Manual (Most Linksys routers use these default username and password: admin / admin)


Here is how to connect a Linksys Cisco router to WTVA VPN:

  • 1. Go to Setup --> Basic Setup;












  • Login or Signup to see the rest of this guide